From the attic side I stuck this cable down. And I’m now going to bring the video camera up and install it right over that hole. I have actually pre-drilled, you can see there I’ve pre-drilled three pilot holes, here, here and here. From the attic side I stuck this cable television down. And I’m now going to bring the video camera up and mount it right over that hole. I’ve pre-drilled, you can see there I’ve pre-drilled three pilot holes, here, here and here.

That’s a 3/4″ spade bit, to push that through. So I’ll link the cam ends and press it back up. Alright so I have actually got the cables connected from thecamera end. I like to put electrical tape on them, it probably doesn’t need it up in the attic, however it definitely doesn’t injure anything. You’ll see here, pull the electrical tape tight as you’re wrapping it around, extend it a little bit it’ll will get the imprint and keep all that nice and tight. Now one technique here to be able to do a smaller hole up here, you can certainly do a smaller sized hole. I’ve done ti with a 5/8″, it’s truly tight. I did this last one with a 3/4″ spade bit, but if you’ll observe here … let’s see if I can do this while on a ladder and holding the cam here, sorry for my unstable camera work …

That does not fit so as most of you have actually probably figured out, press one through then you have this thinner cable next to it and then push them both through. So now you simply … oops sorry for the cam work … keep pressing that through … aiming to do this with one hand … and you’ll show up here and you’ll mount the camera over that and your pre-drilled holes and you’ll have no cable televisions showing. right up the middle, simply screw it there, goal it, then bring up your phone app, aim the camera how you desire it, and you’re done. So here it is installed, up under the eve. That’s wast she appears like. Here’s a view of another one my cameras I installed too.

As found on Youtube